Nordson DuraBlue D4L Customer Product Manual

Operating Parameters
B-1
Part 1032059B
E 2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Appendix B
Operating Parameters
Operating parameters are organized in this appendix according to the
logical groups listed in Table B-1. For information about selecting and
editing operating parameters, refer to Section 3, Installation, Setting Up the
Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B-1 Parameter Groups
Group Parameters Description
Standard 0 to 11 Frequently used parameters
Temperature Control 20 to 26 Control heater function
Seven-day Clock 50 to 77 Configure the clock feature
PID Selection 80 to 91 Change preset PID settings

Nordson DuraBlue D4L Specifications

General

Brand	Nordson
Model	DuraBlue D4L
Category	Industrial Equipment
Language	English