Troubleshooting
6-1
Part 1032059B
E 2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Section 6
Troubleshooting
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
This section provides quick-reference information for diagnosing melter
faults indications as well as comprehensive melter diagnostic information
that is provided in flowchart format.
If you cannot resolve the problem using the troubleshooting flowchart,
contact your Nordson representative for technical assistance.
Safety
S Never disconnect cables from, or reconnect cables to, any circuit board
while the melter is energized.
S Before breaking any hydraulic connection, always relieve system
pressure. Refer to Section 5, Relieving System Pressure.
S Refer to the safety information provided with optional equipment.
To Next Page
Loading...
Need help?
General
