Nvidia Jetson Orin NX User Manual

Modular Connector
PRELIMINARY INFORMATION
NVIDIA Jetson Orin NX DG-10931-001_v0.1 | 12
Figure 5-1. Jetson Orin NX Module Installed in SODIMM Connector
Standoffs
SO-DIMM
Connector
Jetson Orin
NX Module
(Envelop view)
Mounting Screws
5.3 Module Installation and Removal
To install the Jetson Orin NX module correctly, follow the sequence and mounting hardware
instructions:
Here are some suggested assembly guidelines.
1. Assemble any required thermal solution on the module.
2. Install the module
a). Start with baseboard that has suitable standoff to match SODIMM connector height.
b). Insert module fully at an angle of 25-35 degree into the SODIMM connector.
c). Arc down the module board until the SODIMM connector latch engages.
d). Secure the module to the baseboard with screws into the standoff or spacer (shown in
Figure 5-2).
Figure 5-2. Module to Connector Assembly Diagram
Standoff
Mounting Screw
To remove the module correctly, follow the installation sequence in reverse.

Nvidia Jetson Orin NX Specifications

General

Brand	Nvidia
Model	Jetson Orin NX
Category	Computer Hardware
Language	English