PRELIMINARY INFORMATION
NVIDIA Jetson Orin NX DG-10931-001_v0.1 | 39
Chapter 9. Display
Jetson Orin NX designs can select from either VESA
®
Embedded DisplayPort
®
(eDP) for
embedded displays, and HDMI
™
or DisplayPort (DP) for external displays. Only one interface is
available. However, DisplayPort does support multi-head display through MST.
Table 9-1. Jetson Orin NX eDP, DP, and HDMI Pin Descriptions
Pin #
Module Pin
Name
Orin Signal Usage and Description
Recommended
Usage
Direction Pin Type
98 DP1_AUX_N SF_DPAUX01_N Display Port 1 Aux– or HDMI DDC SDA
HDMI Connector
Bidir
DP_AUX
(eDP/DP) or
Open-Drain,
1.8V (3.3V
tolerant - DDC)
100 DP1_AUX_P
SF_DPAUX01_P
Display Port 1 Aux+ or HDMI DDC SCL
63 DP1_TXD0_N HS_DISP0_HDMI_D2_DP0_N
DisplayPort 1 Lane 0 or HDMI Lane 2
Output HDMI / DP
65 DP1_TXD0_P HS_DISP0_HDMI_D2_DP0_P
69 DP1_TXD1_N HS_DISP0_HDMI_D1_DP1_N
DisplayPort 1 or HDMI Lane 1
71 DP1_TXD1_P HS_DISP0_HDMI_D1_DP1_P
75 DP1_TXD2_N HS_DISP0_HDMI_D0_DP2_N
DisplayPort 1 Lane 2 or HDMI Lane 0
77 DP1_TXD2_P HS_DISP0_HDMI_D0_DP2_P
81 DP1_TXD3_N HS_DISP0_HDMI_CK_DP3_N
DisplayPort 1 Lane 3 or HDMI Clk Lane
83 DP1_TXD3_P HS_DISP0_HDMI_CK_DP3_P
96 DP1_HPD GP74_HPD0_N
Display Port 1 or HDMI Hot Plug Detect.
Must be active high for DP. For HDMI, the
polarity can be changed in SW.
Input CMOS – 1.8V
94 HDMI_CEC GP05_HDMI_CEC HDMI CEC Bidir Open Drain, 1.8V
Notes:
1. In the Direction column, Output is from Jetson Orin NX. Input is to Jetson Orin NX. Bidir is for Bidirectional signals.
2. The direction shown in this table for DP_AUX_CH[1:0]_HPD is true when used for Hot-plug Detect. Otherwise, if used as GPIOs, the direction is
bidirectional.
A standard DP 1.4 or HDMI v2.0 interface is supported. These share the same set of interface
pins. Therefore, either DisplayPort or HDMI can be supported natively.