Omron CS Series Operator's Manual

xi
About this Manual, Continued
This manual contains the following sections.
Section 1 introduces the special features and functions of the CX-Simulator and a comparison be-
tween SYSMAC CS/CJ-series PLCs
Section 2 provides the information on how to setup the CX-Simulator.
Section 3 describes the basic operation of the CX-Simulator.
Section 4 describes how to debug user programs.
Section 5 describes how to debug Serial Communications functions.
Section 6 describes how to debug Network Communications functions.
Section 7 describes how to connect with application programs.
Section 8 provides information on how to debug using virtual external inputs.
Section 9 describes operations of the CPU Unit including cycle times and I/O Memory allocation.
Section 10 provides information on errors and alarms that occur during the operation along with the
remedies.
Appendix provides information on how to use the Data Trace Recording Tool.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron CS Series Specifications

General

Brand	Omron
Model	CS Series
Category	Network Hardware
Language	English