Omron CS Series Operator's Manual

Debug Console Window Section 3-9
78
[Console Display Settings]
Console Display Settings sets for the CX-Simulator display.
· Select Icon Size Select the icon size for the CX-Simulator Debug Con-
sole, which will be reflected at the next startup.
· Event Action Set for the event action. Checking [Show a viewer
automatically for Alarms] will start the Alarm Display
program when an alarm occurs. Checking [Popup a
window automatically for Messages] will automatically
display the Messages window when its contents are
updated.
· Alarms Display Specify the application program for the alarm display.
Otherwise, the Notepad.exe will be used (OS stan-
dard) for Windows 95 or 98. An application program
can not be specified for Windows NT because the
alarm display is performed only by the event viewer
(OS standard).
· Window Position Checking [Always on Top] will display each window for
the Debugger in front.
· OK Save the present settings and exit the window.
· Cancel Discard the present settings and exit the window.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron CS Series Specifications

General

Brand	Omron
Model	CS Series
Category	Network Hardware
Language	English