Omron SMARTSTEP A Series User Manual

Chapter 2
2-55
Standard Models and Specifications
■ Computer Monitor Cables (R7A-CCA002P@)
Computer Monitor Cable and Computer Monitoring Software (run on Windows, Cat. No. SBCE-011)
for Servo Drivers are required to use a personal computer for monitoring and setting parameters for a
Servo Driver. There are two kinds of cable, one for DOS personal computers, and the other for NEC
PC98 notebook computers (but not for PC98 desktop computers).
● Cable Models
For DOS Computers
For NEC PC98 Notebook Computers
● Connection Configuration and External Dimensions
For DOS Personal Computers:
For NEC PC98 Notebook Computers
Model Length (L) Outer diameter of sheath Weight
R7A-CCA002P2 2 m 4.2 dia. Approx. 0.1 kg
Model Length (L) Outer diameter of sheath Weight
R7A-CCA002P3 2 m 4.2 dia. Approx. 0.1 kg
Personal computer
(DOS)
Servo Driver
R7D-AP@
39 42L
32.2
t=15
13.2 dia.
6
Servo Driver
R7D-AP@
Notebook computer
(NEC PC98)
L
t=12.7
39
29.5
42
13.2 dia.
6

Omron SMARTSTEP A Series Specifications

General

Brand	Omron
Model	SMARTSTEP A Series
Category	Servo Drives
Language	English