Omron SYSMAC CS1W-SCB41-V1 User Manual

690
V600/V620 ID Controller Protocol Appendix P
519 (0207) Write (ASCII/2) Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
520 (0208) Write (ASCII/4) Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
521 (0209) Write (ASCII/8) Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
522 (020A) Write (Hex/1) Used when the number of Heads to be written
to the Carrier is 1.
Ye s N o
523 (020B) Write (Hex/2) Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
524 (020C) Write (Hex/4) Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
525 (020D) Write (Hex/8) Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
526 (020E) Auto-write (ASCII/1) Used when the number of Heads to be written
to the Carrier is 1.
Ye s N o
527 (020F) Auto-write (Hex/1) Used when the number of Heads to be written
to the Carrier is 1.
Ye s N o
528 (0210) Polling Auto-write
(ASCII/2)
Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
529 (0211) Polling Auto-write
Subcommand
(ASCII/2)
Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
530 (0212) Polling Auto-write
(ASCII/4)
Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
531 (0213) Polling Auto-write
Subcommand
(ASCII/4)
Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
532 (0214) Polling Auto-write
(ASCII/8)
Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
533 (0215) Polling Auto-write
Subcommand
(ASCII/8)
Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
534 (0216) Polling Auto-write
(Hex/2)
Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
535 (0217) Polling Auto-write
Subcommand (Hex/2)
Used when the number of Heads to be written
to the Carrier is 2.
Ye s N o
536 (0218) Polling Auto-write
(Hex/4)
Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
537 (0219) Polling Auto-write
Subcommand (Hex/4)
Used when the maximum number of Heads to
be written to the Carrier is 4.
Ye s N o
538 (021A) Polling Auto-write
(Hex/8)
Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
539 (021B) Polling Auto-write
Subcommand (Hex/8)
Used when the maximum number of Heads to
be written to the Carrier is 8.
Ye s N o
540 (021C) Data check Writes and verify the CRC code for the check
blocks designated by the user.
Ye s Ye s
541 (021D) Control management Performs I/O or an I/O read. Yes Yes
542 (021E) Error information read Reads information from the latest error log. Yes Yes
543 (021F) Command processing
cancel
Cancels command processing except polling
command processing and returns to the com-
mand waiting status.
Ye s Ye s
Sequence
No.
Communications
sequence name
Function Ladder interface
Send word
allocation
Receive word
allocation

Omron SYSMAC CS1W-SCB41-V1 Specifications

General

Brand	Omron
Model	SYSMAC CS1W-SCB41-V1
Category	Network Hardware
Language	English