Omron SYSMAC CS1W-SCB41-V1 User Manual

732
Hayes Modem AT Command Protocol Appendix Q
Password Verification Operation
The number of retries is 3 for password verification.
Data Send/Receive (Sequence No. 553 (Hex 0229))
Data Send/Receive can be executed using sequence No. 553. The send data sent to another exchange is set
in the words specified by the 3rd operand of PMCR(260). Data received by the PLC is stored in the words
specified by the 4th operand of PMCR(260).
Operand and Send/Receive Data Word Settings of PMCR(260)
OPR 2 #0229
OPR 3 First address C1 of the words where send data is set
OPR 4 First address C2 of the words where receive data is stored
•Send Data Words
C1+0 Number of words from address set for operand 2 to end of data 4 digits Hex
C1+1 Number of bytes of send data 4 digits Hex
C1+2
:
C1+n
Send data (dialling operation)
(Fill data to left for odd numbers of bytes)
ASCII
• Receive Data Storage Words
C2+0 Number of bytes of receive data 4 digits Hex
C2+1
:
C2+n
Receive data (dialling operation)
(Fill data to left for odd numbers of bytes)
ASCII
PLC
Personal computer
(remote exchange)
Password verification
(starting #552)
Dispatching
character string
(Retry up to 3 times)
Receiving
password
Verifying
password
Verification
result
Terminating
process
Password
Receiving character
string
Issuing password
"Password: "
When Protocol Macro Execution Flag turns ON:
Port 1: CIO 190915 for the Serial Communica-
tions Board and CIO 1500 + 25 x unit number
+9, bit 15 for Serial Communications Units.
Port 2: CIO 191915 for the Serial Communica-
tions Board and CIO 1500 + 25 x unit number
+19, bit 15 for Serial Communications Units.

Omron SYSMAC CS1W-SCB41-V1 Specifications

General

Brand	Omron
Model	SYSMAC CS1W-SCB41-V1
Category	Network Hardware
Language	English