25
En
Turning On & Basic Operations
Turning On/Off the AV Controller
Tip
• For details on power management settings, see “Auto Standby” (➔ page 68).
Turning On
1
(European and Asian models)
Set %POWER to the ON position (^) on the front panel.
The AV controller enters standby mode.
2
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV controller comes on, the display lights.
Turning Off
1
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV controller will enter standby mode. To prevent any loud surprises when you turn on the AV controller,
always turn down the volume before you turn it off.
(European and Asian models)
To completely shut down the AV controller, set %POWER to the OFF position (@).
8ON/STANDBY 8ON/STANDBY
%POWER
(North American models)
(European and Asian models)
8RECEIVER
RECEIVER
To Next Page
Loading...
Need help?
General
Weight and Dimensions
