44
Making Copies
Zoom/Effects
Creates multiple images on the sheet from single
sided original.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None” or “Print”. Refer to "18
Img. Repeat Dotted Line" of
the Copier Settings. (See
page 73)
Negative/Positive image can be created for special
effects.
or
1 2
1 2
■■
■■
■ Image Repeat
■■
■■
■ Inverse
● In Centering and
Image Repeat
mode, make
copies with the
ADF open more
than 45 degrees
wide.
● Remove the originals from the ADF before
selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centering and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centering and Image Repeat
modes.
To Next Page
Loading...
Need help?
General
