60
Making Copies
NOTE
● When using the double exposure mode, the M5 is turned On and other job requiring memory
cannot be used.
● The default setting of Double Exposure Mode is "ON" in the Copier Settings "19 Double
Exposure". If this setting is changed to "OFF", this mode cannot be used.
Select Double Exposure copy mode when copying
a 2-Sided original that is smaller than Invoice size
onto one side of a standard size media (Ex: Letter
size). One side (Front) of the original is copied at the
top of the page, and the other side (Back) is copied
at the bottom on the copied page.
NOTE:
● If the ADF is opened during Double
Exposure copy mode, an incorrect position
detection of the original may occur when a
strong light shines onto the glass.
● An incorrect exposure may occur when
there is a black line at the edge of the
original, or an image which the machine
interprets as a black pattern in this mode.
● The final copy may be affected if colored
background original(s) do not have a white
edge, or if they are less than 2 mm wide.
Original Size:
Maximum Invoice
Copy Size:
Letter
Ex. Invoice
Front Side
Image
Back Side
Image
1
4
• Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original Guide.
Original Guide
NOTE:
If “YES” is selected, the machine
will start copying only scanned
original.
Other Features
■■
■■
■ Double Exposure
To Next Page
Loading...
Need help?
General
