81
Function Parameters
■■
■■
■ Printer Settings
Screen
No.
00 Job Completion Time Sets the job completion time setting. 180
● 1 ~ 999 sec.
01 Page Protection Compresses automatically and then prints out. Off
● Off, On
02 Error Page Print Sets the error page printout. On
● Off, On
03 Spool Function Sets the spool function. On
● Off, On
04 Text Print Prints text page only. On
● Off, On
05 PS Configuration Print Prints the PS status page.
∗
● Stop, Start
06 Printer Settings Print Prints the printer status.
● Stop, Start
07 Font List Print (PCL) Prints the PCL font list.
∗
● Stop, Start
08 Font List Print (PS) Prints the PS font list.
∗
● Stop, Start
09 Mailbox Data Holding Sets the automatic holding period of mailbox 7 days
data.
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
10 Delete Mailbox Data Deletes the mailbox data. Before
● All, Before
11 Print Queue Delete Sets the delete authorization for the print queue. Key op.
● Free, Key op. (operator)
12 AppleTalk Zone Name Inputs an AppleTalk Zone name.
∗∗
● Maximum 32 characters
13 NetWare Sets the NetWare Operating System.
∗∗
On
● Off, On (When using IPX/SPX protocol of
Novell NetWare)
Modes Function
Initial
Setting
01/03
02/03
03/03
NOTE
● The Key Operator Password is required before any changes can be made to items on this
page.
∗
Functions No. 05, 07, and 08 are available when the following options are installed.
Function No. 07: Printer Controller Module (DA-PC800)
Function No. 05 and 08: Multi Page Description language Controller Module (DA-MC800)
∗∗
When Function No. 12 or 13 is set, cycle the power by turning the Power Switch on the Left
Side of the machine OFF and ON.
To Next Page
Loading...
Need help?
General
