79
Function Parameters
NOTE
● The Key Operator Password is required before any changes can be made to items on this page.
■■
■■
■ General Settings
Screen
No.
Modes Function
Initial
Setting
48 Data Deletion Of HD Selects the deletion level of hard disk data in Basic
every copy/scan/print job.
● Basic, Medium, High
Every copy/print job data is automatically
deleted after each job is completed.
Select one of the 3 available Data deletion
security levels (Basic, Medium and High).
For higher security select Medium and High, however,
the deletion time increases with the increase in
security level, and may take longer to erase the data.
49 Copy Bin Home Position Sets the copy bin to return to its home position. Off
● Off, On
50 Key Operator Password Input the Key Operator Password. 00000000
51 HD Drive Lock Settings Sets or releases the Drive Lock, or changes
the password for the Drive Lock.
● Set Drive Lock
● Change Password
● Release Drive Lock
55 User Authentication
Enables or disables the user authentication for each
Off
function. (copying, faxing, scanning, and printing)
(For each function)
● Copy, Fax, Scanner, Printer
● Time Zone
Depends on Country code.
56 Authentication Method* Selects the authentication method to use by NTLM
the User Authentication function.
● Clear Text, NTLM
57 Administrator Name
Inputs the system administrator name and password.
58 ID Timeout* Selects the valid period of authentication. Auto Reset Time
● Auto Reset Time, After Every Job
59 Logon Attempts* Sets the permitted number of logon attempts. 0
● 0 ~ 9
60 Lockout Time* Sets the time period for the system lockout 5
when the permitted number of logon attempts
is exceeded during the user authentication.
● 1 ~ 60
61 User Auth. Domain Sets the NetBIOS domain and DNS suffix to
use for user authentication.
● 00 ~ 09
10/13
13/13
■■
■■
■ Copier Settings
Screen
No.
00 Paper Size Priority Selects paper size priority. LETTER
● LEDGER, LEGAL, LETTER, LETTER-R,
INVOICE, A3, B4, A4, A4-R, B5, B5-R, A5,
8 x 13, 8.5 x 13
01 Original Mode Default Selects original setting. T/P
● Text, T/P (Text/Photo), Photo
Modes Function
Initial
Setting
01/05
11/13
12/13
* No. 56, 58, 59, 60 are only available when No.55 setting is set to On.
To Next Page
Loading...
Need help?
General
