PLEM 50 C4
GB
│
IE
│
23 ■
Clearing an individual measured value from the
measured value memory
♦ In memory mode, press the Save button 7 and the Back/Clear
button 6 together for less than 1.5 seconds to clear the cur-
rently displayed measured value. “CLEAR” is shown briefly on the
display 1 and a double beep sounds as confirmation.
Clearing all measured values from the measured
value memory
♦ In memory mode, hold the Save button 7 and the Back/Clear
button 6 pressed together for more than 5 seconds to clear all
measured values. “CLEAR ALL” is shown briefly on the display 1
and a double beep sounds as confirmation.
Leaving the measured value memory
♦ Press the Back/Clear button 6 to leave the measured value
memory and return to the main screen mode. The memory symbol
M and the memory location number b disappear from the
display 1.
Belt pouch
♦ Use the supplied belt pouch to protect the device when not in use.
Note: You can attach the belt pouch to a belt. To do this, slip the
belt through the loop of the belt pouch.
To Next Page
Loading...
