Pfaff 3371-1 series User Manual

Input
61
Group
Gruppe
Parameter
Parameter
Description
Bedeutung
Setting
range
Set value
600 611 Automatic clamp opening off
With this function the automatic ope-
ning of the clamp after thread trim-
ming can be switched off. After the
machine has been switched off, the
automatic clamp opening function
is always activated.
ON - OFF OFF
612
Test function continuous start
ON - OFF OFF
800 The function groups and the functions
Programming the Function Keys P, P1-
P8 and C1-C3 can be released for mani-
pulation (ON) or locked (OFF). If a func-
tion group is suppressed, its parame-
ters cannot be changed until a valid ac-
cess code has been entered. Once a
valid access code has been entered,
the suppression is cancelled until the
machine is switched off.
801
Right of access function group 000
ON - OFF ON
802 Right of access function group 100 ON - OFF ON
807 Right of access function group 600 ON - OFF OFF
808 Right of access function group 700 ON - OFF OFF
809 Right of access function group 800 ON - OFF OFF
810 Right of access to keys "P",
"P1" - "P8" and "C1" - "C3"
ON - OFF ON
811
Access code
This parameter is used to alter the ac-
cess code. Upon delivery the
machine is set with the access code
"3371".
3371
11.08 Error messages on the display
Following error messages are shown on the control panel display
ERROR: 1 Processor error STACK_OVERFLOW
ERROR: 2 Processor error STACK_UNDERFLOW
ERROR: 3 Processor error UNDEF_OPCODE
ERROR: 4 Processor error PROTECTION_FAULT

Pfaff 3371-1 series Specifications

General

Brand	Pfaff
Model	3371-1 series
Category	Sewing Machine
Language	English