Care and maintenance
67
Fig. 12 - 05
12.06 Oiling the bearing points in the arm
Once a month pour a few drops of oil
into hole 1.
Only use oil with a mean
viscosity of 10.0 mm
2
/s at 40°C
and a density of 0.847 g/cm
3
at
15°C.
We recommend
PFAFF sewing machine oil, part
no. 280-1-120 105.
●
1
Fig. 12 - 06
12.07 Oil disposal
When required, unscrew oil collector 1
and dispose of the oil in accordance with
the valid local environmental regulations.
The oil must not get into the se-
wer system! Danger of damage
to the environment!
●
1