Philips LFH 9600 User Manual

19User manual
ENGLISH
Use more of your Digital 5
Pocket Memo
Use Philips SpeechExec software5.1
Philips SpeechExec software can be used for
advanced configuration of the Digital Pocket
Memo, automatic download, conversion and
routing of dictation files.
D Note
For detailed information about SpeechExec
software, refer to the SpeechExec user manual.
Advanced configuration5.1.1
The Digital Pocket Memo Configuration
Wizard is part of the Philips SpeechExec Pro
Dictate software. It guides users through the
device configurations and settings of the Digital
Pocket Memo. The wizard assists in configuring
time format, sound feedback, voice-activated
recording, display appearance (standard or
advanced display mode), recording format,
microphone sensitivity, keywords, and file
download to the PC.
Connect the Digital Pocket Memo to the PC 1
using a USB cable.
Start 2 Philips SpeechExec Pro Dictate software.
Click 3
Settings > General settings on the menu
bar of SpeechExec to open the settings
menu and select
DPM/DT Configuration > DPM
Wizard
from the list on the left side.
Click the 4
Start Wizard… button to open the
wizard. Follow the on-screen instructions to
customize the Digital Pocket Memo.
Click the 5
Finish button to close the wizard
and confirm the transfer of the new settings
to the Digital Pocket Memo.
D Note
When the Digital Pocket Memo is connected
to the PC for the first time, Windows detects
the new hardware and automatically installs
the required drivers. When the installation is
complete, Windows may prompt you to restart
the PC.

Philips LFH 9600 Specifications

Connectivity

docking connector	8-pin female
USB	Mini USB 2.0 female (full speed, 12 Mbit/s)
DC in voltage	6 V
microphone impedance	2 kΩ
earphone impedance	8 Ω or more

Display

display type	TFT-Transreflective
diagonal screen size	1.71 " / 44 mm
resolution	128 × 128 pixels

Power

power supply	6V DC / 850 mA
power consumption	800 mA maximum
battery type	two Philips AAA Ni-MH rechargeable batteries (LFH 9154) or two AAA batteries (LR03 or R03)
battery life with Philips Ni-MH rechargeable battery	17 hours
battery life with Philips alkaline battery	15 hours
charging time (USB fast charging)	2.5 hours

Recording Specifications

recording format	DSS / DSS Pro (Digital Speech Standard)
memory type	Secure Digital (SD)/ Multimedia Card (MMC) up to 2 GB
recording modes	Quality Play (QP), Standard Play (SP), Long Play mobile (LPm)
recording time with 128 MB card	10.7 / 21.8 / 32.7 hours
recording time with 2 GB card	170 / 349 / 523 hours
sampling frequency (Quality Play mode)	16 kHz
sampling frequency (Standard Play mode)	12 kHz
sampling frequency (Long Play mode)	8 kHz
compression rate (Quality Play mode)	26 kbit/s
compression rate (Standard Play mode)	13.5 kbit/s
compression rate (Long Play mode)	9 kbit/s
frequency response (Quality Play mode)	200 to 7 500 Hz
frequency response (Standard Play mode)	200 to 5 500 Hz
frequency response (Long Play mode)	200 to 3 500 Hz

Speaker

built-in speaker	30 mm round dynamic speaker
output power	200 mW

Operating Environment

operating temperature	5° - 45° Celsius / 41° - 113° Fahrenheit
humidity	10 % - 90 %

Weight and Dimensions

product dimensions (W x D x H)	50 x 116 x 17 mm / 2.0 x 4.6 x 0.7 inch
weight	106 g / 3.7 oz, including two Philips AAA Ni-MH rechargeable batteries (LFH 9154)