RAD-...-IFS
8 / 198
PHOENIX CONTACT 105542_en_05
1.3 Field of application of the product
1.3.1 Intended use
The devices are designed for use in industrial environments.
The Radioline wireless system is a Class A item of equipment and may cause radio interfer-
ence in residential areas. In this case, the operator may be required to implement appropri-
ate measures and to pay the costs incurred as a result.
Operation of the wireless system is only permitted if accessories available from
Phoenix Contact are used. The use of other accessory components could invalidate the op-
erating license. You can find the approved accessories for this wireless system listed with
the product at phoenixcontact.net/products
.
1.3.2 RAD-2400-IFS wireless module
Please note that, in combination with antennas, the maximum permissible transmission
power may be exceeded. In this case, set the transmission power via the software (see
“Transmission power” on page 39).
Install the wireless module at least 1 m away from other devices using the 2.4 GHz fre-
quency band (e.g., WLAN, Bluetooth, microwave ovens). Otherwise, both the link quality
and the data transmission speed will be reduced.
1.3.3 RAD-868-IFS wireless module
For the country registrations, please visit phoenixcontact.net/product/2901541.
The RAD-868-IFS wireless module is only approved for use in Europe and South Africa.