Polaris 2008 ranger 700 xp Service Manual

9.10
BRAKES
PARKING BRAKE CALIPER SERVICE
Exploded View
Caliper Removal
NOTE: Do no get oil, grease, or fluid on the park
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1. Remove the clip pin and pin (A) from the park brake cable.
NOTE: Be sure the park brake is not engaged.
2. If replacing the brake pads, slightly loosen the caliper
assembly bolts before removing the complete caliper
assembly. This will ease the caliper disassembly procedure
later.
Pad & Holder
Nut
Hex Head
Mount Bolt
Sleeve
Thrust Washer
Shim Pack
(4 Shims)
Pad & Holder
Lever
Asm. Bolt
Steel Balls (3)
Plain Washer
Hex Nut
Stationary Actuator
Compression Spring
Spring Pin
Figure 9.10
18 ft. lbs.
25 ft. lbs.
(24 Nm)
(34 Nm)
A
4x4 Model Shown
4x4 Model Shown

Polaris 2008 ranger 700 xp Specifications

General

Brand	Polaris
Model	2008 ranger 700 xp
Category	Automobile
Language	English