2.12
GENERAL INFORMATION
Maintenance References, Continued.....
* More often under severe use, such as operated in water or under severe loads.
**Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
***Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or Mobilegrease Special
Item Lube Rec. Method Frequency*
6. Hubstrut Assembly
(Both Sides)
Polaris All Season Grease (PN
2871423)
Locate grease fitting on the
underside of the hubstrut
assembly and grease with
grease gun.
Semi-annually**
7. Swing Arm Pivot
Polaris All Season Grease (PN
2871423)
Locate grease fitting on inside
of the swing arm pivot.
Semi-annually**
8. Rear Prop Shaft Yoke
Polaris Premium U-Joint Lube
(PN 2871551)
Locate fittings and grease with
grease gun.
Semi-annually**
9. Front Prop Shaft Yoke
Polaris Premium U-Joint Lube
(PN 2871551)
Locate fittings and grease with
grease gun.
Semi-annually**
10. Rear Gearcase
ATV Angle Drive Fluid
(PN 2871653)
Drain completely. Add lube to
specified quantity.
Change annually***
6. Hubstrut Assembly
7. Swing Arm (6x6)
8. Rear Prop Shaft (6x6)
9. Front Prop Shaft
10. Rear Gearcase
Yoke
Yok e
Swing Arm Pivot
Fill Plug
10. Rear Gearcase
(6x6)
(4x4)