6.4
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
SHIFT LEVER / CABLE
SHIFT LEVER REMOVAL
1. Remove the shift knob cover, retaining screw and
shift knob from the shift lever.
2. Remove the screws retaining the center console
using a T27 and T30 Torx driver. Remove the
console from the vehicle.
3. Remove the clip and washer retaining the shift cable
to the shift lever and disconnect the cable end from
the lever.
4. Remove the retaining ring and slide the shift lever off
the mounting bracket and out from the frame.
5. Remove both bushings from the shift lever and
service as needed.
SHIFT LEVER INSTALLATION
1. Perform the removal steps in reverse order to install
the gear shift lever (lever, cable, console, shift knob).
TRANSMISSION
To Next Page
Loading...
Need help?
General
