9.36
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
6. Install wheel hub assembly, washers, and castle nut.
Torque castle nut to specification and install a new
cotter pin.
TORQUE
Rear Hub Castle Nut:
110 ft-lbs (149 Nm)
7. Install rear caliper (see Chapter 9 – REAR CALIPER
SERVICE, page 9.31). Follow bleeding procedure
outlined earlier in this chapter.
8. Field test unit for proper braking action before putting
into service. Inspect for fluid leaks and firm brakes.
Make sure the brake is not dragging when pedal is
released. If the brake drags, re-check assembly and
installation.
BRAKE SYSTEM
To Next Page
Loading...
Need help?
General
