Polycom Visual Concert VSX User Manual

Customizing the VSX System
4 - 33
Configuring Call Settings
The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings:
Setting Description
Allow Mixed IP
and ISDN Calls
VSX 3000
VSX 5000
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Specifies whether users can make multipoint calls that
include both IP and H.320 sites.
Unchecking this option provides extra security for systems
requiring LAN connectivity while placing encrypted calls over
ISDN lines. If you clear this selection, IP endpoints cannot
join ISDN calls.
Maximum Time in
Call
Enter the maximum number of minutes allowed for call
length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
Auto-Answer
Point to Point
Specifies whether to answer incoming point-to-point calls
automatically.
Auto-Answer
Multipoint
VSX 3000
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Specifies whether to answer incoming multipoint calls
automatically.

Polycom Visual Concert VSX Specifications

General

Brand	Polycom
Model	Visual Concert VSX
Category	Conference System
Language	English