Polycom Visual Concert VSX User Manual

Customizing the VSX System
4 - 37
Configuring with PathNavigator’s Conference on Demand Feature
If your organization uses Polycom’s PathNavigator, you can use
PathNavigator’s Conference on Demand feature to place multipoint calls with
up to 10 sites, including the site that places the call.
In order to place calls using PathNavigator, you need to:
• Register your VSX system with PathNavigator
• Configure your VSX system to use PathNavigator for multipoint calls (see
Configuring the System to Use a Gatekeeper on page 3-7)
• Create a multi-site entry in the Directory that can be used to place the
multipoint call
Including More Than Three Other Sites in a Cascaded Call
You can include multiple sites in a cascaded call if the sites you call have the
internal MCU capability. The following diagram shows how to do this.
Points to note about PathNavigator’s Conference on Demand:
• Once the call begins, users cannot add another site to the call — even if the site
was in the call originally and is attempting to rejoin. Because of this, you cannot
place cascaded multipoint calls through PathNavigator.
• The MGC needs to have enough ports available to complete the call. The
system displays a message if the MGC does not have enough ports (resources)
available to connect all the sites.
Any video
Originating
VSX System
Site 1
internal MCU
Video
Site 2
conferencing
system
Site 5
Any video
conferencing
system
Site 6
Any video
conferencing
system
Site 7
Any video
conferencing
system
Site 8
Any video
conferencing
system
Site 9
Any video
conferencing
system
Site 10
system with
conferencing
internal MCU
Video
Site 3
system with
conferencing
internal MCU
Video
Site 4
system with
conferencing

Polycom Visual Concert VSX Specifications

General

Brand	Polycom
Model	Visual Concert VSX
Category	Conference System
Language	English