Polycom VSX 3000 User Manual

Customizing the VSX System
4 - 39
Setting Date, Time, and Location
You can update the system with regional settings, including the
location-specific language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
Allow Directory
Changes
Specifies whether users can save changes they make to the
directory.
Confirm Directory
Additions
Specifies whether users are prompted to confirm new
directory entries when saving the information for the last site
called.
Confirm Directory
Deletions
Specifies whether users are prompted to confirm deletions
of directory entries.
Setting Description
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Language Sets the language for the user interface.
Country Code Specifies the country code for the system location.
Area Code
Required
Specifies if an area code is required to place ISDN calls in
the specified country.
ISDN International
Access
Specifies the international code required for placing ISDN
calls from the system location to another country.
Room Telephone
Number
Indicates the telephone number of the room where the
system is located.

Polycom VSX 3000 Specifications

General

Brand	Polycom
Model	VSX 3000
Category	Conference System
Language	English