Configuring Network Use
3 - 25
Configuring the Global Directory
If your organization uses the Polycom Global Management Systemâ„¢, you can
configure your system to use the Global Directory. The Global Directory
provides a list of other systems that are registered with the Global Directory
Server and available for calls. The other systems appear in the Directory,
allowing users to place calls to other users by selecting their names.
Configuring the Directory Server Settings
To configure the Directory Server settings:
1. Go to System > Admin Settings > Global Services > Directory Servers.
2. Configure these settings:
Setting Description
Global Directory
(GDS)
Specifies the IP address or DNS address of the Global
Directory Server. You can enter up to five addresses.
Password Lets you enter the Global Directory password, if there is one.
Register Registers this system with the Global Directory Server.
Display Global
Addresses
Displays other registered systems in the Global Directory.
Display Name in
Global Directory
Specifies whether to display the system’s name in the Global
Directories of other registered systems.
Save Global
Directory to
System
Copies the Global Directory to this local system.
Group Name Specifies the group name used for Global Directory entries in
the local Directory.
To Next Page
Loading...
Need help?
General
