Polycom VSX 3000 User Manual

Configuring Network Use
3 - 23
To configure the analog phone line (POTS line) for the VSX 7000e or VSX 8000
system:
Configuring Call Preferences
Call preferences help you manage the network bandwidth used for calls. You
can specify the default and optional call settings for outgoing calls. You can
also limit the call speeds of incoming calls.
To choose call preferences:
1. Go to System > Admin Settings > Network > Call Preference.
2. Configure these settings:
Go to this screen: Configure these settings:
Telephony
System > Admin Settings >
Network > Telephony
Enter the System Telephone Number for the
analog phone line.
Call Preference
System > Admin Settings >
Network > Call Preference
Enable Analog Phone.
Network Dialing
System > Admin Settings >
Network > Call Preference >
Next
Add Analog Phone to the Dialing Order
Setting Description
Enable H.239 Specifies standards-based People+Content data collaboration.
Enable IP H.323 Allows the system to make IP calls.
Enable SIP Allows the system to use SIP when connecting IP calls.
Enable ISDN
H.320
VSX 3000
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Allows the system to make ISDN calls.
This selection is only available when the system has ISDN
networking capability.
Enable Voice
Over ISDN
Allows the system to make voice-only calls to phones
connected to an ISDN network, such as an organization’s
PBX.

Polycom VSX 3000 Specifications

General

Brand	Polycom
Model	VSX 3000
Category	Conference System
Language	English