30 | MOVE ZR Installation & Owner’s Guide
Charging Dock
Move Remote
NAVIGATION HEAD LEDs
REMOTE FEATURES OVERVIEW
Remote Battery Level Indicator
The Move Remote LED serves as a battery level indicator for the remote. When a button is
pressed, the LED will flash either red, yellow or green, depending on the battery level (red
being low, green being charged).
Charging the Move Remote
The Move Remote snaps into the Charging Dock. It can be stored in the dock or removed
and used. To remove the remote, grab either side and firmly pull it from the cradle.
While charging, the LED on the remote will flash red if the battery is low, yellow at mid-charge,
green when nearing full charge, and will shift to a solid green when fully charged.
Charging Temperature Constraints
To avoid damage, the Move Remote will not be charged in extreme hot or cold
temperatures. If the remote LED displays solid red, it is over temperature (113°F). If it
displays solid blue, it is too cold for charging (32°F).
Firmware Updates
If a firmware update is available, the next time the remote is plugged into the dock it will
be downloaded. While the update is downloading to the remote, the LED will slowly
blink red. While the update is installing to the remote, the LED will flash red and green
intermittently. When the update is installed, the LED will turn off.
Remote LED
Using the MOVE REMOTE
ADDITIONAL HEAD UNIT LED FUNCTIONS
All LEDs Flash TEAL: MOVE is in Pairing Mode
All LEDs Flash RED: Error (Check Simple Display for More Information)
All LEDs Jog ORANGE: Update Downloading
All LEDs Jog YELLOW: Powering Up
LED NAME FUNCTIONALITY
Anchor Lock
Prop
Navigation
Mode
- Anchor Mode On
-Navigation Heading On
-Prop On, Forward
-Prop On, Reverse
To Next Page
Loading...
Need help?
General