Qlogic SANsurfer FC HBA Manager User Manual

Getting Started
Specifying the Adapter Driver Settings
SN0054651-00 G 5-31
A
Figure 5-15 Settings Page (Linux Failover Driver Only)
The identifying information includes:
 Hostname is the name or IP address of the host connected to the
adapter.
 Adapter Model is the QLA2xxx adapter model number.
3. Under Target: Display Options, click one of the following to specify
whether the system should recognize only targets configured using
SANsurfer FC HBA Manager:
 If you want the system to see all targets at all times whether or not the
target was configured with SANsurfer FC HBA Manager, click Present
targets that are persistently bound plus any new target(s) with
driver defaults.
 If you want the system to see only targets configured using SANsurfer
FC HBA Manager, click Present persistently bound target(s) Only.
 (Linux failover driver only) If you want the system to see only targets
with driver defaults, click Present target(s) with driver defaults. This
option is available only for Linux operating systems.
NOTE:
If you select the Linux option Present target(s) with driver
defaults, the system ignores persistent data.

Qlogic SANsurfer FC HBA Manager Specifications

General

Brand	Qlogic
Model	SANsurfer FC HBA Manager
Category	Software
Language	English