SN0054651-00 G xiii
Preface
The SANsurfer FC HBA Manager User’s Guide describes the SANsurfer FC HBA
Manager tool, used to configure and manage QLogic SANsurfer Fibre Channel
(FC) host bus adapters (HBAs) and Fibre Channel over Ethernet (FCoE)
converged network adapters (CNAs) within storage area networks (SANs).
What’s in this Guide
This guide contains the basic information you need to get started with the
graphical user interface (GUI)-based SANsurfer FC HBA Manager management
tool.
This preface explains the typographic conventions used in this guide, lists related
documents, specifies the intended audience, refers you to the QLogic license
agreements, and provides technical support and contact information.
The remainder of the user's guide contains the following sections and appendices:
Section 1 SANsurfer FC HBA Manager Overview describes the features of
SANsurfer FC HBA Manager.
Section 2 System Overview outlines the hardware and software installation
of devices controlled by SANsurfer FC HBA Manager.
Section 3 System Requirements lists the hardware and software
requirements needed for optimum SANsurfer FC HBA Manager
performance.
Section 4 Installing SANsurfer FC HBA Manager describes how to install
and uninstall SANsurfer FC HBA Manager.
NOTE:
Throughout this guide, HBA and adapter are used interchangeably, as are
the terms target and device.
NOTE:
For detailed information about the features and functionality not covered in
this guide, refer to the help system (see “Getting Help” on page 5-12).
To Next Page
Loading...
Need help?
General
