QRP Labs QMX User Manual

NOTE 1: If you are using other software than WSJT-X or JS8Call, then QMX CAT commands
should still work with this software. If you encounter difficulties then it is possible that your software
is trying to communicate with QMX using CAT commands that are not supported by QMX. In the
section of this manual on the CAT Test utility (in the QMX Terminal applications), you will find a
listing of the CAT commands supported by QMX. Another useful utility is the log file, which will let
you record all CAT commands received and investigate any issues. If CAT commands are missing
for your application, QRP Labs can add support for them easily.
NOTE 2: As mentioned above, CAT control of transmit/receive switching is recommended. If you
INSIST on using VOX, QMX can support that. For example, you may be using a software
application which does not support CAT control of transmit/receive switching and can only use
VOX. In that case you should change the QMX transmit/receive switching mode from CAT to VOX
in the QMX terminal Configuration utility or in the menu on the QMX itself, which is described
elsewhere in this manual.
QMX operang manual; rmware 1_00_012 52

QRP Labs QMX Specifications

General

Brand	QRP Labs
Model	QMX
Category	Transceiver
Language	English