Chapter 5 Troubleshooting and Diagnostics
Error Codes
LTO Ultrium 8-Slot Autoloader User’s Guide 41
Table 9 Electronic
Harware Errors
Table 10 Drive Errors
Error and Event
Log
5
Every autoloader provides an internal error and event log with 64 entries.
This log data is helpful for development and service purposes. The error
and event log is accessible through the Operator’s Panel and can be read
out entry by entry.
Error Code Hex Notation Description
B0 ROM error.
B1 RAM error.
B2 NVRAM error.
B3 CTC error.
B4 UART error.
B5 Display error.
B6 Memory error.
B7 Timeout on loader command.
Error-Code Hex Notation Description
BA Drive load timeout.
BB Drive unload timeout.
BC Over temperature problem.
BD No connection to drive.
BE Generic drive response error.
BF Drive broken, needs repair.
To Next Page
Loading...
Need help?
General