Appendix A Specifications
Disposal of Electrical and Electronic Equipment
LTO Ultrium 8-Slot Autoloader User’s Guide 55
Disposal of Electrical and Electronic Equipment 1
This symbol on the product or on its
packaging indicates that this product
should not be disposed of with your other
waste. Instead, it should be handed over to
a designated collection point for the
recycling of electrical and electronic
equipment. The separate collection and
recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the
environment. For more information about where you can
drop off your waste equipment for recycling, please visit
our website at: http://qcare.quantum.com
or contact your
local government authority, your household waste disposal
service or the business from which you purchased the
product.
Transportation (4)
ISTA Procedure 2A
Swept sine applied during non-operation
(5)
and operating
(6)
5 to 500 to 5 Hz
(1)
A 0.3 g rms random vibration spectrum is applied to the bottom/top axis
for a minimum of 20 minutes per axis.
(2)
A 1.06 g rms random vibration spectrum is applied to each of three
orthogonal axes for a minimum of 20 minutes per axis.
(3)
The autoloader has been unpacked, but is not operating.
(4)
The autoloader is packaged in its original shipping container.
(5)
Three sweeps at one octave per minute are applied to each axis at 0.75 g (0
. peak) input.
(6)
Three sweeps at one octave per minute are applied to the top/bottom axis
at 0.3 g (0 . peak) input.
Random vibration
(1)
applied during operation
To Next Page
Loading...
Need help?
General