RADWAG WPT series User Manual

9. INSCRIPTIONS ON THE DISPLAY
No Text string Description
1. FIL
Filter level
2. bAud
Transmission baud rate
3. PCS
Piece counting
4. HiLo
+/- control according to a standard mass
5. rEPL
Automatic printout
6. StAb
The condition of printing data
7. Auto
Autozero correction
8. t1
Power save – time to switch off while no operation
9. toP
Latch of the max measurement
10. Add
Totalizing
11. AnLS
Weighing animals
12. tArE
Memory of 9 tare values
13.
Indication in autozero zone (indication = exact zero)
14.
Stable result (ready to read)
15. PCS Operation mode – counting pieces
16. kg (g) Operation mode – weighing
17.
Rechargeable battery pack or battery discharged (BAT-LO)
18. Net
Tare function has been used
19. Min
+/- control with reference to the standard mass: setting
the lower threshold or mass below the first threshold
20. OK
+/- control with reference to the standard mass:
load mass between the thresholds
21. Max
+/- control with reference to the standard mass: setting
the upper threshold or mass over the second threshold
- 21 -

RADWAG WPT series Specifications

General

Brand	RADWAG
Model	WPT series
Category	Scales
Language	English