15.7. Measurement max force on the pan – latch
Procedure:
• Enter to <toP> function:
• Confirmation of choice of <toP> function is indication of the Max
pictogram:
• Apply a force to the weighing pan.
• The display of scale will latch the maximum value of the force
• Remove loads from the pan
• Before the next measurement press the
key.
Return to weighing:
• Press the
key twice.
15.8. Totalizing
Scale software is equipped in a totalizing function of single weighings.
The totalizing procedure can be documented on the printer connected
to the indicator.
- 52 -
To Next Page
Loading...
Need help?
General
