• Load an animal to the platform,
• After exceeding the -LO- value (see 13.2), program starts the
weighings process. The appearance of subsequent hyphens
< - - - - - - - > showing the progress,
• After completing the process of weighings the result is latched
on the display and additionally the OK pictogram is shown in
the upper part of the display:
• You can start the procedure of weighing animals again by
pressing
,
• After removing the animal from the platform program returns
to the window:
Return to weighing:
• Press .
15.10. Tare memory
Users are allowed to Enter Up to 9 tare values to the memory.
15.10.1. Entering the tare value to the scale memory
Procedure:
• Enter to <tArE> function:
- 57 -
To Next Page
Loading...
Need help?
General
