- 5 -
1. INTENDED USE
Scales are designed for fast and precise measurements of weighed loads
masses and direct commercial settlements. Tarring in full weighing range
enables to determine net mass of weighed loads.
Functions:
• backlight of display
• level of filtration
• autozero function
• setting baud rate of transmission
• continuous data transmission for RS 232
• automatic operation for RS 232
• designed printouts
• designation minimum mass for function operating
• counting pieces
• +/- mass control
• percentage deviation from standard mass
• latch of maximum scale indication
• automatic tare
• memory of tare
• Memory of 9 tare values
• inscribing tare value
• automatic scale switch-off
• user calibration
• Totalizing
• Weighing animals
User functions may have attribute of accessibility. For this reason it is
possible to adjust scale to individual needs to provide access to only
these functions which are currently needed. Attribute determination
accessible / inaccessible is possible in user menu and described in
further part of manual.
To Next Page
Loading...
Need help?
General
