Return to weighing:
See 10.2.2.
Notice:
When bl=Auto, and the indication has not changed for 10s, the
backlight is automatically switched off. The backlight is switched
on again automatically after the result changes.
14.1.2. Backlight for supplying from batteries
The user can change the intensity of backlight from 0% to 100%.
The lower the intensity is the longer the scale operates without recharging
or exchanging batteries. When the intensity is set this function works as
AUTO (described above).
Procedure:
• Enter the submenu <P5.othr> and then:
Return to weighing:
See 10.2.2.
Notice:
The more intense the backlight is the shorter the scale operates
on batteries.
- 38 -
To Next Page
Loading...
Need help?
General
