15.8.1. Enabling the work mode
Procedure:
• Enter to <Add> function:
• A letter „P” in the left side of the display is a confirmation that
<Add> function have been selected:
15.8.2. Totalizing procedure
• Enter <Add> function according to ch. 16.8.1,
• Put the first load on the pan. If the weighing procedure is performed
in a container put the container on the pan first and tare it. Then put
the first load on the pan and confirm it by pressing
when stable
(signalled by
),
• You will see a sum of weighings on the display, the „▲” pictogram
in the upper right corner will be displayed and the weighing result
will be printed on the printer connected to the indicator.
- 53 -
To Next Page
Loading...
Need help?
General
