11. WEIGHING
Put a load you want to weigh on the weighing pan. When the
pictogram appears it means that the result is stable and ready to read.
In order to assure long-term operation and appropriate measurements of
weighted loads following precautions should be taken into consideration:
• Loads should be placed on the pan delicately and carefully
in order to avoid mechanical shocks:
• Loads should be placed centrally on the pan (errors caused
by eccentric weighing are outlined by standard PN-EN 45501
ch. 3.5 and 3.6.2):
• Do not load the pan with concentrated force:
• Avoid side loads, particularly side shocks should be avoided:
- 24 -
To Next Page
Loading...
Need help?
General
