Procedure:
After displaying the level of batteries (in per cents) the program returns
to weighing.
14.4.2. Battery discharge pictogram
The symbol (bat low) switches on when the voltage level drops to 18%
of the accepted level of voltage. It means that charging or exchanging
batteries is required.
Low level of batteries:
• Pictogram on the display,
• After one time the device will automatically switch off
to protect the batteries from distructable discharging,
• Charging is signalled by (blinking period about
2 seconds) on the display.
14.4.3. Accumulator charging option
This function allows to switch on charging algorithm for a NiMH battery
pack (for indicators in plastic casings) or a gel cell SLA accumulator
(for indicators in metal housings):
a) Parameter <CHr6> set to <no>:
• Pictogram does not appear, charging disabled,
• During software initializing, after turning on <bAtt>.
b) Parameter <CHr6> set to <YES>:
• Pictogram blinks slowly (period about 2 seconds),
charging is enabled,
- 41 -
To Next Page
Loading...
Need help?
General
