Radwin 1000 User Manual

RADWIN Manager Traps Chapter 7
RADWIN 1000/2000/5000 User ManualVersion 2.5.30p3 7-11
RADWIN Manager Traps
The RADWIN Manager application issues traps to indicate various events,
displayed in the Wvents Log.
Table 7-5: RADWIN Manager Trap Messages
Trap Message Severity Remarks
Error loading trap catcher. Port 162 is already in use. Warning NMS will not catch any
traps from target, some
other application has
grabbed this port
Device unreachable! Error Check connectivity to target
Connected to <site_name> Information
<site_name> Site will be reset. Information
Restore Factory Default Settings in process on Site
<site_name>
Information
Factory Settings: The process was not finished due to
connection issues.
Warning Factory setting failed due to
connectivity problem to tar-
get
Reset: The process was not finished due to connec-
tion issues.
Warning Factory setting failed due to
connectivity problem to tar-
get - Target will not be
reset
Cannot Write to Monitor file. There is not enough
space on the disk.
Warning Free some space on disk
and retry
Windows Error: <error_ID>. Cannot Write to Monitor
file.
Warning Operating System error
TDM Counters were cleared for both sides Information
Identical IP addresses at <local_site_name> and
<remote_site_name>
Warning Set up a different IP to each
site
The Product is not identified at the
<local_site_name> site.
Warning NMS is incompatible with
the target release
The Product is not identified at the
<remote_site_name> site.
Warning
The Product is not identified at both sites. Warning
Product Not Identified! Warning
The Manager identified a newer ODU release at the
<remote_site_name> site.
Warning ODU release is newer than
NMS release. Wizards are
not available. NMS will be
used just for monitoring.
Upgrade the NMS. (You will
get this message as a pop
up)

Radwin 1000 Specifications

General

Brand	Radwin
Model	1000
Category	Microphone system
Language	English