Radwin 1000 User Manual

Installing the Link: Step 3, Channel Settings Chapter 4
RADWIN 1000/2000/5000 User ManualVersion 2.5.30p3 4-17
If you have forgotten the Link Password, click the Forgotten Link Pass-
word button. The following window is displayed:
Figure 4-12: Lost or forgotten Link Password recovery
Follow the instructions to use the Alternative Link Password, and click
OK to finish. You are returned to the window in figure 4-11 above.
Continue with the next step.
3. Enter a new password.
4. Retype the new password in the Confirm field.
5. Click OK.
6. Click Yes when asked if you want to change the link password.
7. Click OK at the Password changed success message.
Installing the Link: Step 3, Channel Settings
RADWIN 1000/2000/5000 systems have a feature called Automatic Channel
Selection (ACS). In the event of sync loss, ACS chooses the first available
channel in a list of monitored channels nominated in the Channel settings
window of figure 4-13 below. A channel switch takes place sufficiently fast
as to ensure no loss of service.
Note
• Restoring Factory Defaults returns the Link Password to wireless-
bridge.
• If the link is inactive, then the link password may also be changed
from the Site Configuration dialogs. See page 6-14.

Radwin 1000 Specifications

General

Brand	Radwin
Model	1000
Category	Microphone system
Language	English