R&S LCX Series User Manual

Getting started
R&S
®
LCX Series
38User Manual 1179.2260.02 ─ 02
●
gray - disabled
●
red - faulty
●
yellow - denotes a specific status
Table 4-7: Instrument status bar
Indicator Description
Touchscreen
Indicates that the touchscreen is locked.
See Chapter 9.3, "User button", on page 118
Virtual Network Computing
White indicates that the VNC service is enabled for remote access over
LAN.
See "Remote operation (VNC)" on page 140.
File Transfer Protocol
White indicates that the remote access to the file system over LAN is
enabled.
See "Remote file access (FTP)" on page 141.
(Remote control with SCPI
commands)
Indicates the status when working with remote control commands:
●
single white flash:
SCPI command received successfully
●
red
A remote control error has occurred, entered in the SCPI error
queue
●
gray
no SCPI communication
Measurement mode
White indicates that the R&S LCX measures in continuous measurement
mode.
See Chapter 8.1, "Measurement mode", on page 67
Trigger event
Flashes once on a trigger event.
Logging
Indicates the logging state:
●
white
Data logging is running.
●
red
A logging error has occurred.
●
gray
Logging is disabled
See Chapter 8.8.3, "Logging", on page 94
USB host interface
White indicates that a connected USB memory device is in use.
See Chapter 4.1.8, "Connecting USB devices", on page 22.
USB device interface The USB remote control connection is established.
See "Establishing a USB remote control connection" on page 158.
LAN interface
The R&S LCX is connected to LAN.
See Chapter 4.1.7, "Connecting to LAN", on page 21.
Instrument control

R&S LCX Series Specifications

General

Brand	R&S
Model	LCX Series
Category	Measuring Instruments
Language	English