Raymarine eS Series User Manual

12.7Networkcabletypes
Thereare2typesofSeaTalk
hs
networkcable—
“patch”and“network”.
•Patch—forconnectingthefollowingdevicestoa
Raymarinenetworkswitch:
–ThermalcameraviaPoEinjector.
–AdditionalRaymarinenetworkswitch.
–PCorlaptopusingVoyagePlannersoftware.
•Network—forconnectingthefollowingdevices
toaRaymarinenetworkswitch:
–SonarModule.
–SR100Siriusweatherreceiver.
–AdditionalcompatibleRaymarinemultifunction
displays.
SeaTalk
hs
networkcables
CablePartnumber
1.5m(4.9ft)SeaTalk
hs
networkcable
E55049
5m(16.4ft)SeaTalk
hs
networkcable
E55050
10m(32.8ft)SeaTalk
hs
networkcable
E55051
20m(65.6ft)SeaTalk
hs
networkcable
E55052
SeaTalk
hs
patchcables
CablePartnumber
1.5m(4.9ft)SeaTalk
hs
patch
cable
E06054
5m(16.4ft)SeaTalk
hs
patch
cable
E06055
10m(32.8ft)SeaTalk
hs
patch
cable
E06056
15m(49.2ft)SeaTalk
hs
patch
cable
A62136
20m(65.6ft)SeaTalk
hs
patch
cable
E06057
12.8SeaTalk
ng
cablingcomponents
SeaTalk
ng
cablingcomponentsandtheirpurposes.
Connection/CableNotes
Backbonecable(various
lengths)
Themaincablecarryingdata.
Spursfromthebackboneare
usedtoconnectSeaTalk
ng
devices.
T-piececonnectorUsedtomakejunctionsinthe
backbonetowhichdevices
canthenbeconnected.
Terminator
Requiredateitherendofthe
backbone.
InlineterminatorUsedtoconnectaspur
cabledirectlytotheendofa
backbone;usefulforlonger
cableruns.
Spurcable
Usedtoconnectdevices
tothebackbone.Devices
maybedaisychainedor
connecteddirectlytothe
T-pieces.
SeaTalk
ng
5–wayconnector
Usedtobranch,split,or
makeadditionalconnections
inSeaTalkorSeaTalk
ng
networks.
BlankingplugInsertedintounusedspur
connectorpositionsina
5-wayconnectororT-piece.
136eSSeriesinstallationinstructions

Raymarine eS Series Specifications

General

Brand	Raymarine
Model	eS Series
Category	Monitor
Language	English

Summary

Important Information for Raymarine eS Series

Certified Installation Recommendations

Product Safety and Operational Warnings

Covers potential ignition, high voltages, grounding, and operational safety.

Planning the Installation

System Integration and Compatibility

Installation Checklist

Outlines the key tasks required for a successful installation.

Networking Constraints and Protocols

Selecting an Installation Location

Provides guidance on choosing a suitable location considering various factors.

Cables and Connections

Power and Data Connections

Details 3-pin and combined power/data cable connections and ratings.

Network and Communication Connections

Explains SeaTalkng, NMEA 2000, SeaTalk, and NMEA 0183 connections.

Sonar and Radar Connections

Details how to connect sonar modules and radar scanners to the system.

Mounting the eS Series Display

Surface Mounting Procedures

Provides instructions for mounting the display directly onto a flat surface.

Bracket (Trunnion) Mounting

Getting Started with eS Series

Powering On/Off and Unit Controls

Instructions for powering the unit on/off and using its physical controls.

Homescreen Navigation and Applications

Initial Setup Procedures

Guides through essential initial configuration settings and procedures.

System Status and Software Updates

System Checks

GPS System Check

Verifies the correct operation of the GPS receiver using the chart application.

Radar System Check

Guides on checking radar scanner operation, including safety precautions.

Sonar System Check

Troubleshooting Common Issues

Power Up Troubleshooting

Addresses issues with the unit not turning on or rebooting.

Radar and GPS Troubleshooting

Sonar and Network Troubleshooting

Touchscreen and Wireless Troubleshooting

Technical Support and Resources

Raymarine Customer Support

Contact information and resources for obtaining customer and technical support.

Learning Resources

Connectors and Pinouts

Power, Data, and Video Connector Details

Network Connector Pinouts

SeaTalkng Connector Pinout