72 RC435 and RC435i Chartplotters
Stop Follow or Stop GoTo
➤ To stop following the route or target point:
1. Either press the GOTO key or move the cursor over the target waypoint.
2. Select the STOP GOTO or STOP FOLLOW function:
The dotted line from the vessel to the target waypoint disappears.
5.5 Changing the Display Mode
Use the PAGE key to select the desired display mode. Repeat presses of
the PAGE key provide the following display modes:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Chart display
Note: Press the GOTO key in any display mode to return to normal Chart
display.
➤ To change the display mode:
1. Press the PAGE key to show the SET UP f u nc tions with SYSTEM SET UP
highlighted:
2. Repeat Step 1 to cycle through each of the available display modes.
Note: The Set Up Function Bar remains displayed in each display mode.
To remove the Set Up Function Bar, press CLEAR.
D4
To Next Page
Loading...
Need help?
General