To Next Page

To Previous Page

86 RC435 and RC435i Chartplotters

5.9 Using Archives

The ARCHIVE function is used to save routes, tracks and waypoints to the

Gold Chart card. This is particularly useful if you use a lot of routes,

tracks or waypoints and do not wish to repeatedly re-enter these. Once

you have archived your data to the card, the copy on the chartplotter can

be deleted, thus freeing up memory.

Note: A typical 32Mb Gold Chart card will hold up to 500 waypoints or

20 routes, each with up to 50 waypoints. If the Gold Chart card also con-

tains chart files then these values will be lower.

Archiving a Route

➤ To archive a route:

1. In chart mode, press ENTER; the primary function bar is displayed:

2. Using trackpad left/right, select ARCHIVES.

3. Select ARCHIVE ROUTE. A list of routes currently loaded in the chart-

plotter is displayed. Use trackpad up/down to select the route you

wish to archive and press ENTER. To leave without archiving, press

CLEAR.

OBJECT

INFO

Raymarine RC435 User Manual

Questions and Answers: