Re T-one ULS User Manual

T-one ULS
Rev. 06/18 6/26
Instrument functioning
General information
The front panel features a seven-segments led display with four numbers and two bar graphs displays to
display all the adjustment parameters. The keypad allows access to the device programming and calibration.
The state led provides information on the instrument functioning state.
Display
Outside the programming environment, the display shows the diameter, detected by the “diameter
reference” input. Use the set key (see § Keypad on the next page) to display the set percentage of
brake/clutch use (set point).
In programming, use the enter key, to display the programming functions or the values of the associated
parameters.
Bar graphs display
The front panel features two bar graphs displays:
 Display IN: visualizes the percentage, in relation to the full scale, of the diameter detected.
 Display OUT: visualizes the use percentage of the brake/clutch of the signal on the adjusted output.
States LEDs
Display
Bar graphs display

Re T-one ULS Specifications

General

Brand	Re
Model	T-one ULS
Category	Controller
Language	English