Reiner jetStamp 990 User Manual

Your jetStamp 11
ERNST REINER GmbH & Co. KG Originalanleitung
Setting the date and time at the jetStamp 990.
Select the button [SELECT]; the display shows "Change clock".
Push the button [SELECT] again and use the buttons t u and [OK] to set the date/time.
Select the button [OK] to accept the changes
Selecting [RETURN] leaves the menu.
See "Preparation and commissioning" under "Setting Date/Time".
Summertime
Selection between Europe/America/None
See "Preparation and commissioning" under "Setting summertime".
1.3.5 Numbering machine
Numb. machine 1 - 4 (numbering machine 1 - 4)
The numbering machine serves sequential numbering.
Up to 4 different numbering machines can be specified.
A numbering machine used in the selected print image is marked with an appended "*" here. The
specified "Numb. machine 1", for example, is displayed as "Numb. machine 1*".
See "Software application 990 PCset", "Settings Objects - Numbering Machine".
1.3.6 Settings
Cartridge type
Select the button [MENU]. Use the buttons t u to browse until the display shows "Settings"
and then "Cartridge type".
Select [SELECT] to choose the print cartridge.
Possible selections are:
51604A-B (P1-S-BK)
51605R-R (P1-S-RD)
P1-EF-AUB
P1-EF-RD
P1-MP2-BK
P1-MP3-BK
P1-MP4-BK
P1-MP6-YE
P1_AMI_EM
Also see "Technical data and accessories" under "Accessories".

Reiner jetStamp 990 Specifications

General

Brand	Reiner
Model	jetStamp 990
Category	Printer
Language	English